Xlp Series Sealed Circulation Sprayer

• Customization: Available
• Warranty: 1 Year
• Heating Mode: Dielectric
• Atomization: Rotary Atomization
• Flow: Parallel Flow
• Heat Source: Electricity, Steam, Natural Gas, Fuel
• Type: Airflow Spray
• Model No: Xlp Series
• Voltage: 220V-450V
• Condition: New
• Dimension(L*W*H): Depend on The Model
• Material: SUS304, SUS316, Other, Stainless Steel304/316L
• Control: PLC Touch Screen/Button Type
• Dry Powder Yield: >=95%
• Customized: Customized
• Be Used for: Foodstuff Industry
• Be Specialized in: Chemical Industry
• Transport Package: Wooden Cases
• Specification: Deponds On The Model
• Origin: China
• Production Capacity: 50sets/Year

Product Description

XLP Series sealed circulation spray dryer
Work principle
Seal circulation spraying drying system works in a seal circumstance. The drying gas is usually inert gas, such N2. It's applicable for drying material with organic solvent, toxic gas and the material easy to be oxidized. Adopt inert gas as circulation gas, so to protect the material to be dried. The inert gas circulates after dehumidification process.

N2 is heated and then enters into drying tower. Liquid material is conveyed to centrifugal nozzle by screw pump, and then it's atomized into the liquid mist by the atomizer, the heat transferring process is finished in the drying tower. The dry product is discharged at the bottom of tower, the evaporated organic solvent is sucked by the vacuum generated by the fan. Power or solid material will be separated in the cyclone and sprinkling tower. The saturated organic gas is drained out after it's condensed in the condenser.

The gas not condensed recycles in the system after it's heated continuously. Ordinary normal centrifugal spray drying process is realized by air conveying and exhausting process. This is the obvious difference between explosion proof type sealed circulation centrifugal spray drying machine and ordinary centrifugal spray dryer. The drying media in drying system is N2, the interior is under positive pressure. To keep positive pressure stable, the pressure transmitter controls the inlet amount of N2 automatically.

Features of our equipment:
1. The design is explosion-proof, equipped with explosion release discs or vents on the main machine and the key part, so ensure the safety of the operation. (There's no explosion release discs or vents with volatile toxic gas, but the design is special)
2. The solvent will be recovered, so the production cost is low.
3. Adopt a full closed design, so that the collecting rate of the finished product is very high, almost100%, which the other types of dryers are normally lower.
4. Equipped with washing tower device in the system, and adopt advanced atomizing rinsing device in order to improve the operational reliability.
5. For the oxidable material, the closed cycle spray drier uses inert gas as the medium to ensure the materials will not be oxidized. 

Specifications	XLP-5	XLP-10	XLP-25	XLP-50	XLP-100	XLP-150
Inlet air temperature		90-140°C, adjustable
Exhaust air temperature		60-80°C, depending on the product to be dried, and URS
Nominal water evaporationcapacity(Kg / h)	5	10	25	50	100	150
Heating method		Steam
Drying tower diameter (mm)	1300	1500	2000	2500	3200	3600
Overall dimensions (m)		According to the configuration and URS
Product yield		99-99.99%,varies with the product features and configuration

 

 

Q: Can I visit your factory?
 A: Yes. Many domestic and international customers visit our factory every year. Our company is near Shanghai.It only takes you about 1 hour to get to Changzhou. Or we can visit you in Shanghai.

 

Q: What's the quality of your products?
A: Parts of our products come with the best quality, We already exported to lots of countries around the world, such as Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely

Q: What to do if the machine has a problem?
A:24 hours timely response of mail and phone calls. If the parts broken belong to non-artificial factors within 12 months, we offer free replacement. If beyond 12 months, customers should bear the freight back and forth and accessories cost.

Q: How long is the warranty of your equipment? 
 A: Our warranty period is one year generally.

 

Q: What is your payment term
A: Our usual payment term is: 30% TT in advance, 70% TT before shipment. Other ways can also be received after both sides discuss and agree.

 
Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai, if you request CIF, please give us your delivery port, and we will give you the CIF price.